Skip to Content
Back
Alert

Preventing roof collapses in housing

Advice on managing the risks associated with structurally inadequate temporary roof supports in housing construction.

Date: February 1, 2015
Keycode: 1640/01/01.15
Publication type: Alert
Industries: Construction
Download PDF

Description

This safety alert offers advice on managing the risks associated with structurally inadequate temporary roof supports in housing construction.The builder as the person with control of the site must ensure the workplace and the means of entering and leaving it are safe and without risk to health.

Preventing roof collapses in housing

This Alert provides information on managing the risks associated with structurally inadequate temporary roof supports in housing construction.

Background

Builders and truss erectors use temporary roof supports (eg pine studs) when permanent roof support structures (eg columns, posts or walls) for porticos, facades, verandas, garage entrances and other areas have not yet been installed.

Temporarily supporting a house's roof structure during the construction can put the roof at risk of collapse, if the temporary supports used are structurally inadequate for the loads exerted on them.

While temporary supports may be structurally adequate for the bare roof skeleton, it may be insufficient when the roof is exposed to additional loads, such as:

  • the weight of roofing materials, including point loads 
  • roof workers installing roofing
  • exposure to lateral wind loads, or
  • a combination of the above.

A roof held up by structurally inadequate supports puts all workers onsite, and potentially the public, at risk should the supports fail and the roof collapses.

Control measures

The builder as the person with management or control of the workplace must ensure, the workplace and the means of entering and leaving it are safe and without risks to health, so far as is reasonably practicable.

Before allowing any work on, under or near a temporary supported roof structure, ensure the temporary supports are:

  • of adequate strength, stiffness and stability
  • can hold the weight of workers and roof materials, including any point loading
  • braced to prevent bending or other lateral forces
  • secured both top and bottom to prevent dislodgement.
  • protected against impacts and damage

For example when a garage or similar type area with large wall openings is to be roofed prior to the completion of the areas structural elements (eg brickwork, lintels) sufficient braces, props, temporary stud walls or a combination of these should be used to support the roof.

Any work on, under or near a temporary supported roof structure has significant risks and all workers onsite must be provided with site specific induction training which includes information and instruction on the hazards and the controls in place to manage the risk of roof collapse, such as the:

  • location of temporary supports and bracing
  • process to follow to safely get supports or bracing altered
  • identification and reporting of support damage and potential failures.

Monitor the temporary supports, as necessary, to enable work to be done safely.

Inadequately supported roof over garage entrance

Pic 1: Inadequately supported roof over garage entrance

Inadequate temporary support for portico

Pic 2: Inadequate temporary support for portico could lead to roof collapse, and with no physical fall protection workers are at risk of a fall.

Further information

Guidance Note - Stability of buildings during construction
Safety Alert - Preventing structural collapse


Related keywords